3D swing mixer produces excellent mixing results

The three-dimensional oscillating mixer utilizes a unique three-degree oscillating, translational, and rocking principle to produce a generally powerful alternating pulse motion that continuously pushes the mixture, which produces eddy currents with varying energy gradients that produce excellent mixing. The machine also has the advantages of stable operation, low noise, high loading factor and short mixing time.

Part of the three-dimensional oscillating mixer organic seat, variable frequency brake motor, main shaft, rotary link and cylinder. The loaded cylinder is driven by the drive shaft to perform parallel movement and rock-and-roll motion, which promotes the three-way composite movement of the material along the cylinder in the direction of the ring, radial and axial directions, thereby realizing the mutual flow and diffusion of various materials. Doping, the eddy currents produced have varying energy gradients, resulting in excellent mixing effects. The machine also has the advantages of stable operation, low noise, high loading factor and short mixing time.

The three-dimensional swing mixer is widely used in the pharmaceutical, chemical, food, light industry and other scientific research units of the new material mixer. The machine can mix the powdery or granular materials with good flowability very uniformly, so that the mixed materials can achieve good results.

3D swing mixer maintenance:

1 Three-dimensional oscillating mixer needs to be used frequently. The speed reducer must be replaced with new oil every three months. When replacing, the gear unit should be cleaned and new oil added.

2 Equipment parts are regularly inspected 1-2 times a month. The inspection parts are worm gears, worms, bearings, oil seals. Whether the running parts are flexible and the fasteners are loose. If abnormal conditions are found, they should be dealt with in time.

3 During the use of the 3D oscillating mixer , if the mixer is found to be abnormally vibrated or an abnormal sound is emitted, it should be stopped immediately.

4 Electrical control parts should be kept clean and sensitive, and faults should be repaired in time.

5 When mixing and disassembling the slurry, it should be lightly disassembled, stabilized and lightly placed to avoid deformation and damage.

After the use of the 6-dimensional oscillating mixer, the residual materials of each part of the mixer should be brushed. The deactivation time is long. The three-dimensional oscillating mixer must be wiped clean, the surface of the machine is coated with anti-rust oil, and the tarpaulin is covered with a tarpaulin. it is good.