First, "a dozen"
That is, playing the tip. Practical experience, when the soybeans are about to enter the flowering stage before the tip, can make the soybean plants dwarf, enhanced resistance. However, the specific operation must be mastered: "do not fight early in the fight, do not play thinning, thinning does not close" principle, but also should pay attention to not fight too much. In general, it is advisable to remove the tip of the main stem at 2-3 cm.
Second, "two spray"
A spray of ammonium molybdate. Molybdenum is an important element in maintaining the normal activities of rhizobia in legumes. Foliar sprayed with ammonium molybdate is generally better at 0.03-0.05% solution with twice initial flowering and flowering. It is better if potassium dihydrogen phosphate is mixed at the same time.
Second spray "increase production spirit." According to the survey: After soybeans are sprayed with “promoting yieldâ€, plant height, branching, and pods can be significantly increased, and the yield can be increased by more than 10%. Spraying spirit of increasing production can generally use 10-15ppm concentration of aqueous solution in flowering period, generally about 3g per mu.
Made from medical grade polypropylene PP, safety is more
Use three material seals: non-adhesive seal, silicone seal, heat sealing film seal
According to 12 × 8, it is used to extract free DNA, adapt to KingfisherFlex
Applications, such as high-throughput screening (HTS), cell, tissue culture, continuous dilution, reagent metastasis and low-80 ° C sample preservation (PP material minimum tolerant temperature -80 ° C)
No DNA enzyme, no RNase, no hotme.
Deep Hole Plate,96 Deep Well,96 Deep Well Plate,96 Deep Hole Plate
Jiangsu iiLO Biotechnology Co., Ltd. , https://www.iilogene.com