Safety use
1. The fully automatic gas-fired steam boiler shall be accompanied by the design documents required by the safety technical specifications, the product quality certificate, the safety and maintenance instructions, and the supervision and inspection certificate (safety performance supervision and inspection certificate).
2. Installation, maintenance and renovation of the boiler. The unit engaged in the installation, maintenance and transformation of the boiler shall obtain the qualification certificate for the installation and maintenance of special equipment issued by the provincial quality and technical supervision bureau before it can engage in the installation, maintenance and transformation of the boiler. Before the construction, the construction unit will inform the municipality or the special equipment safety supervision and management department of the municipality directly under the jurisdiction of the construction, maintenance and transformation, and send the construction notice to the local county-level quality and technical supervision bureau for the record, and then notify the construction.
3. Acceptance of boiler installation, maintenance and renovation. After the completion of the construction, the construction unit shall report the water pressure test and installation supervision of the boiler to the Special Equipment Inspection Institute of the State Bureau of Quality and Technical Supervision. After passing the qualification, the State Quality and Technical Supervision Bureau, the State Special Equipment Inspection Institute, and the County Quality and Technical Supervision Bureau will participate in the whole experience.
4. Registration of the boiler. After the boiler is inspected, the user must fill in the "Boiler (Census) Registration Form" in accordance with the "Special Equipment Registration and Use Management Rules", register with the State Bureau of Quality and Technical Supervision, and apply for the "Special Equipment Safety Use Registration Certificate". 》.
5. Operation of the boiler. Boiler operation must be carried out by a certified person who has passed the training and obtained the "Special Equipment Operator Certificate". The operation rules, eight systems and six records must be strictly observed during use.
6. Inspection of the boiler. The boiler shall be inspected once a year, and boilers that have not been inspected safely shall not be used. The safety accessories of the boiler are regularly inspected once a year. The pressure gauge is checked once every six months. Safety accessories that have not been inspected regularly shall not be used.
7. It is strictly forbidden to install the atmospheric boiler as a pressure boiler. It is strictly forbidden to use boilers with three safety accessories such as water level gauge, safety valve and pressure gauge.
Medical Consumables
Medical consumables and equipment's are the most used regularly at the hospitals/laboratories.
including Medical Vacuum Safety Needle,Glucose Tube,Grey Glucose Tube,Blood Taking Collection Safety Needle etc.
As the top rank manufacturer of non-vacuum blood collection tubes on both quality
and quantity in China, Xinle has more than enough capacity in design, develop and
manufacture tubes according to customer specific requirement at a cost that's
rarely available anywhere else.
The disposable peripheral safety blood lancet is composed of out shell, trigger, plastic handle, spring, back cover and
protective cap. The needle body is made of Ocr18Ni9 stainless steel wire, and the spring is made of carbon spring steel
wire or stainless steel wire. The back cover is made of PE plastic, the shell is made of ABS or PP plastic, and the other
injection parts are made of ABS plastic.
01 - Purchase of raw materials
The company's purchase of raw materials shall be caried out in accordance with the company's "raw material purchase
requirements document", and the purchased raw materials shall be strictly inspected.
02 - Product inspection
In the process of production, the product shall be subject to one hour sampling inspection, and the finished product shall be
subject to sampling inspection and sample retention by batch, so that the batch can be traced.
03 - Product sterilization
This product is sterilized by iradiation of cobalt 60 or epoxy 2-alkane, so as to achieve complete sterilization without residue,
longer warranty period and more safety.
04 - Product salient features
Beautiful appearance, comfortable grip, one-piece injection molding of needle body, exposed air of needle plutonium, avoid-
ing pollution of rabbit needle body, three section design of needle iron, small force, spring
With the new design, the puncture time is only 0.3 seconds, and the patient's pain is lower. The blood collection needle
adopts self destruct device, after blood collection, the needle body quickly retracts and locks up, the iron is not exposed,
which effectively protects Protect the safety of medical staff.
Medical Consumables,Medical Vacuum Safety Needle,Glucose Tube,Grey Glucose Tube,Blood Taking Collection Safety Needle
Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com