Dental Lab Equipment Sealing Machine Medical Sterilizer Sealer Bag

Dental Sterilization Sealing Machine with CE

Model:
WM-Seal 20C, max sealing length is 22cm
WM-Seal 30C, max sealing length is 33cm

Technicals
Feature

1. CE approved
2. 2. New concept of design
3. Economicl and practical
4. Designed to avoid cutting accidents

 

a) Instructions

1. and adjust the timer according to thickness of the material to be sealed. Use a high-number for thicker material.
2. Important! In order to enhance the quality of the sealing, perform the resistance pre-heating. Press the sealer arm twice simulating the sealing without a package. This procedure may be performed only once before starting the sealing procedure itself but it should be repeated every time the equipment goes idle for longer than 1 minute.
3. Place the envelope on the sealing platform always with the paper side down (directly on the resistance) and the plastic side up and press the sealer arm down firmly. The heating time is controlled automatically after manual adjustment.
4. When the red LED goes off the sealing will be completed. Slide the blade to cut the envelope, raise the sealer arm and remove the package.

Note: In order to make the sealing better, wait for 1 or 2 seconds to release the sealer arm after the red LED goes off. If the heating time is too long or insufficient the sealing might be inefficient (the envelope may be stuck to the sealing area when it is pulled or be visibly badly-sealed). To correct this, adjust the timer properly. Once adjusted it is not necessary to perform any other adjustment to continue sealing.

 

b) Additional information

     1.Keep the sealing platform always clean. The accumulation of waste on the sealing area will reduce the life cycle of the resistance and the insulating material. For an effective cleaning, wait for the sealing area to cool down and use a cloth slightly moistened with alcohol.

    2. If the insulating material lower tape is worn the sealer may go faulty and the resistance may be damaged. Being so, every time the resistance is replaced, please also check the insulating material tape and replace it if it is worn.

    3. If it is necessary to replace the resistance or the fuse, use only those which have the same specifications as the genuine parts.1)New concept of design; 2)Economicl and practical; 3)Designed to avoid cutting accidents and protect hands.     

More details, please contact us.
Kathy
+86 18575748275  

Dental Sterilization Sealing Machine with CE

Model:
WM-Seal 20C, max sealing length is 22cm
WM-Seal 30C, max sealing length is 33cm

Technicals
Feature

1. CE approved
2. 2. New concept of design
3. Economicl and practical
4. Designed to avoid cutting accidents

 

a) Instructions

1. and adjust the timer according to thickness of the material to be sealed. Use a high-number for thicker material.
2. Important! In order to enhance the quality of the sealing, perform the resistance pre-heating. Press the sealer arm twice simulating the sealing without a package. This procedure may be performed only once before starting the sealing procedure itself but it should be repeated every time the equipment goes idle for longer than 1 minute.
3. Place the envelope on the sealing platform always with the paper side down (directly on the resistance) and the plastic side up and press the sealer arm down firmly. The heating time is controlled automatically after manual adjustment.
4. When the red LED goes off the sealing will be completed. Slide the blade to cut the envelope, raise the sealer arm and remove the package.

Note: In order to make the sealing better, wait for 1 or 2 seconds to release the sealer arm after the red LED goes off. If the heating time is too long or insufficient the sealing might be inefficient (the envelope may be stuck to the sealing area when it is pulled or be visibly badly-sealed). To correct this, adjust the timer properly. Once adjusted it is not necessary to perform any other adjustment to continue sealing.

 

b) Additional information

     1.Keep the sealing platform always clean. The accumulation of waste on the sealing area will reduce the life cycle of the resistance and the insulating material. For an effective cleaning, wait for the sealing area to cool down and use a cloth slightly moistened with alcohol.

    2. If the insulating material lower tape is worn the sealer may go faulty and the resistance may be damaged. Being so, every time the resistance is replaced, please also check the insulating material tape and replace it if it is worn.

    3. If it is necessary to replace the resistance or the fuse, use only those which have the same specifications as the genuine parts.1)New concept of design; 2)Economicl and practical; 3)Designed to avoid cutting accidents and protect hands.     

More details, please contact us.
Kathy
+86 18575748275  

Labor Protection Hearing Protector

Dongying Hongxing Labor Protection Products Co., Ltd. was established in December 1995 with a registered capital of 300 million yuan and total assets of 230 million yuan. It has 520 employees, including 22 professional and technical personnel, with a sales volume of 280 million in 2019. Yuan is a private enterprise integrating R&D, production and sales of labor protection products. The company has a professional R&D team, standardized production lines and quality testing facilities. The company produces and operates more than 1,000 products in 30 categories, including Body Protective Clothing, etc., which can meet the comprehensive needs of labor protection from Head Protective Cap to Foot Protective Shoes , that is, labor protection from head to toe. The company has successively become a director unit of the Occupational Health Protection Products Committee of China Textile Business Association, a member unit of China Labor Protection Products Alliance, a member unit of Shandong Labor Protection Products Industry Association, and a top 50 enterprise in the national labor protection industry; Anbeier brand has become Shandong Labor Protection Products Industry Association Recommended Brand. Labor protection products such as Body Protective Clothing and Hand Protective Gloves produced by the company can meet the multi-faceted needs of laborers, and various Daily Washing And Chemical Articles can meet the all-round needs of various companies. Welcome to consult and purchase.

Labor Protection Hearing Protector,Noise Cancelling Earplugs,Hearing Safety Protector,Ear Protection

Dongying Hong Xing Labor Protection Products Co.,Ltd. , https://www.hongxinglabor.com