Pay attention to safety when using constant temperature and humidity test chamber

1. The inside of the door still maintains high temperature. The high temperature air may trigger a fire alarm and cause a mistake. The high temperature moisture is flushed out of the box. During the experiment, the switch box has certain damage to the compressor. Unless the test requires, the customer is not recommended. Frequent switching during the experiment.
2. When using the constant temperature and humidity test chamber, it must be ensured that it is safe and reliable grounding to avoid static induction; circuit breakers and over-temperature protectors, which provide test products and personal safety protection for operators, must be regularly and detailed. Check; the installation position of the wet ball gauze must be accurate to measure the correct relative humidity; when the box is in operation, do not touch it with your hand to avoid electric shock or injury from the fan.
3. Before using the constant temperature and humidity test chamber, please read the instructions carefully and operate in strict accordance with the requirements to avoid unnecessary losses.
4. When the constant temperature and humidity test chamber completes the low temperature operation, the good temperature of the Zui is dried at 60 °C for about 30 minutes before opening the door to avoid affecting the measurement time in the subsequent test or causing the evaporator to freeze; If you have to open it as a last resort, please do not open the door casually, otherwise it may cause the following adverse consequences.

Surgical Drape And Equipment Cover

Nonwoven Surgical Drape,Disposable Surgical Drape,Disposable Surgical Pack Kits,Sterile Surgical Medical Drape

ShaoXing SurgeCare Medical Products Co., Ltd. , https://www.sxsurgecaremedical.com

Posted on