The portable pressure sterilizer liner leaked to affect sterilization?
- Clicks: 984 Release time: 2014/9/10
The portable pressure sterilizer liner leaked to affect sterilization?
Can the liner of the pressure steam sterilizer leak and continue to be used?
It depends on whether the leaked steam has any influence on the electronic circuit and structure of the equipment. Is there a crack in the leaking part of the tank or what? If it is cracked, it is afraid that it will not be able to withstand the pressure, and there is the possibility of blasting.
If the above conditions can be ruled out, in fact, as long as the temperature and pressure can reach the target value, air leakage can be used.
Must be changed. Pressure steam sterilization requires that there must be no air inside, and the presence of air is considered a failure of sterilization.
Food sterilized in vacuum food bags is generally not autoclaved, because the autoclaving temperature is too high, which will deteriorate the packaging bag. Bus sterilization is now generally used. Depending on the size of the object and other conditions, you can check the specific data of the object you need to sterilize.
Portable Pressure Sterilizer Note:
1. During the entire sterilization process, it must be ensured that there is enough water in the device. Since the water evaporates continuously during heating, it is necessary to re-add water every time it is disinfected, otherwise it will easily burn the body and even cause an explosion, causing a serious accident. For safety, the operator must not leave the site.
2. Sterilized articles, due to the different types, volume, density and thermal conductivity of the sterilized articles, the sterilization time and pressure required are also different. If the bulk density of the object is large, the thermal conductivity is poor, and the sterilization time can be appropriately extended. In general, the temperature of the inner layer of the zui should reach 121 ° C; and for a period of time, it can really play a role in sterilization.
[ print ] [ back to top ] [ close ]The new high performance precision gimbal stabilization system ZYX-GS from Tarot provides dedicated independent gimbal control to efficiently and effectively stabilize your AP/AV shots and ideally matched to our new PTZ gimbal and other 3rd party gimbal providers. The ZYX-GS features 3-axis stabilization, adjustable gains (PC), attitude locking and attitude following modes, 3-axis MEMS gyro and accelerometer, free firmware upgrade services. Offering a wide range of servo support and an unbeatable price point, Tarot hopes to continue its trend of supplying quality products to the Heli and Multi-rotor markets at the lowest possible price.
ZYX-GS provides two kinds of stabilization control mode, which are attitude locking mode and following (FPV) mode. These make the users` aerial filming applications more flexible and convenient. ZYX-GS has different control algorithms for position servos and velocity servos (no potentiometer), this advantage allows people to choose suitable control mode according to their servo type.
The gimbal stabilization system ZYX-GS uses high specification 3-axis MEMS gyro sensor and 3-axis MEMS accelerometer sensor. The advanced attitude algorithm`s updating rate is up to 800Hz, which can sense gimbal`s attitude quickly and accurately. The control algorithm is optimized for aerial filming application, adapted to harsh climate, and provides steady performance for gimbals.
Tarot Flight Control,Flight Control System,Drone Controllers,Uav Flight Controller
Dongying Youjia Industry & Trade Co. Ltd. , https://www.uav55.com