1. The built-bed bed is built under the full-light conditions of the exposed area. The brick is made into a 1.2-1.5m wide slotting machine, depending on the size of the long view, and a water pipe with a mist sprayer is erected on the insert bed. 2. The base of the substrate is paved with large stones or pebbles 30 cm thick, and the upper layer is covered with coarse sand 20-30 cm, and then sprayed with 0.2% potassium permanganate solution to disinfect. 3, cuttings preparation in July to collect non-woody jujube head and second branch. Spike time is best at 8 in the morning. If you need long distance transportation, immediately put it into clear water to soak it, then put it into the shaded plastic bag, and immediately cut it into small pieces of 15-20 cm. For the upper leaves, remove the lower 3-5 cm segment of young leaves, soak them in 50% carbendazim 800-fold for 50 minutes, then use 300 mg/kg of D-type rooting powder and 300 mg/kg respectively. The C-type rooting agent was cut at the base of the cuttings for 10 seconds, and was taken out at 23 cm spacing and depth of 2-3 cm. 4. Immediately after the insertion of the management, the full-light intermittent misting device shall be activated. Before the rooting, the interval between sprays shall be short to ensure that the leaves have a layer of water film; after rooting, spray once during the day and 20-30 minutes, during the night, 1-2 Spray once every hour. The spraying time is extended 6 days before transplanting, usually 40-60 minutes. About 15 days after the insertion, a foliar dressing (0.2% urea solution) was performed, and 50% carbendazim was sprayed once a week for 1000 times. Using this technique, the rooting rate of jujube can reach more than 93%, callus can be produced 9-10 days after transplanting, and rooting can begin 15 days later. China Agricultural Network Editor
A Foot Spa Machine with heat is a device used to provide a relaxing and therapeutic foot massage. It usually has a basin filled with warm water and has various massage settings such as vibration, bubbles, and rollers. The heat function helps soothe tired and aching feet, while the massage setting provides a deep-tissue massage that helps improve circulation, reduce tension, and relieve pain. Some foot spas also come with removable attachments, such as pumice stones and brushes, for extra exfoliation and cleansing. Overall, a foot spa machine with heat is a great tool for anyone looking to pamper their feet and promote overall relaxation and wellness.