China's wind power generation business is underway, and the investigation of wind energy resources is a work that must be done to establish wind power facilities. In order to properly assess the wind energy resources of the location where the wind farm is to be built, it is necessary to install the wind gauge at some points and record the data. The wind direction wind speed recorder can record the wind direction wind speed data collected by the wind direction wind speed sensor. In the automatic mode, the interval time must be set first, and the instrument can automatically record the data according to the set interval time.
The wind direction wind speed recorder is also called the wind direction wind speed recorder. The steps are as follows:
1. Connect the recorder to the serial port of a general computer (PC586 or higher) with the supplied communication cable.
2. Run the recorder application on the computer and set the recording start time, recording period, stop time, stop mode and other parameters of the recorder.
3. After the setting is completed, disconnect the recorder from the computer (or not work offline, display the recording status on the computer in real time), and place the recorder in the occasion to be detected.
4. After the completion, connect the recorder to the computer, run the recorder application, and download the recorded data to the computer for data processing.
5. For detailed instructions, please refer to the instruction manual or contact directly online.
When using the wind direction wind speed recorder, it should be noted that the wind direction wind speed recorder is a more sophisticated instrument to prevent collision vibration. It should not be used in places with excessive dust or corrosiveness. After the instrument is repaired, it must be recalibrated.
Nano Stick Tape,Reusable Nano Tape,Traceless Adhesive Tape,Double Sided Gel Adhesive Tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytapes.com