Red heart dragon fruit planting method red heart dragon fruit high-yield planting technology

Delicious and nutritious dragon fruit has been eaten by everyone, its taste is sweet, refreshing and juicy, very delicious. Moreover, dragon fruit is a very long-lived plant, which has a very good health care effect on the human body. The dragon fruit on the market has three kinds of white heart, red heart and yellow heart. Today we mainly come to understand the red heart dragon fruit. Red heart dragon fruit refers to its flesh is purple-red, the taste is more delicious than white heart dragon fruit, and the nutrition is more abundant.

Red heart dragon fruit planting method Red heart dragon fruit high-yield planting technology

Red heart dragon fruit planting method

The characteristics of the red heart dragon fruit must be set to facilitate growth, flowering results and management harvest. The bracket should be firm, resistant to heavy pressure and wind; it should be resistant to soil corrosion; According to practice, there are three brackets to choose from.

Reinforced concrete column freestanding bracket. The square reinforced concrete column with a length of 2 m has a thickness of 11-12 cm square, buried 0.5 m in the soil and 1.5 m above the ground. The top has 6-7 cm of steel reinforcement to weld a steel cross-centered disc with a diameter of approximately 0.7 m. The column spacing is 3 m (row spacing) × 2 - 2.5 m (plant spacing), about 111-89 bars/mu.

One seedling is planted on each side of the column, which is rooted and artificially bound by gas. The stem climbs up to the top along the column, and then stretches and hangs on the iron ring. Only the drooping branches are easy to bloom. Old tire tires can be placed on the iron ring to avoid over-temperature or breakage. The strength of the cement column is good, and the independent ventilation and light transmission is good, but it must be buried in reality. The stalk vines are evenly distributed around the area (manual assistance) to avoid tilting.

Galvanized iron tube rectangular row bracket. Rows of wooden stakes are laid at a row spacing of 3 m. The thickness, fastness and corrosion resistance of the piles are kept at least for more than one year. The column spacing is 1 m and the height is 1.2-1.4 m. Two seedlings are planted next to each other. After planting, a durable galvanized iron pipe (water pipe) bracket is planned to be used, and a pipe having an outer diameter of 2.5 cm is used. The foot is set to 0.5 m on both sides with the wooden pile as the center, that is, the frame width is 1 m.

The pipe can be used as a foot or a 7-8 cm square cement column (with steel bars inside) for the legs, which will be more durable. The buried depth is to be firm, and the buried pipe should have a concrete pier foundation. The height of the ground is still 1.5 m, the distance between the legs is 2 -2.5 m (depending on the strength of the pipe and the growth of the plant), and the pipe is welded horizontally and longitudinally between the tops.

Within one year of planting, the stems and vines of the seedlings grow taller and branching, and the stems must be manually guided to the sides of the pipe racks at all times to allow the row of brackets to withstand heavy pressure. Row-type stents are easier to manage and have higher yields. The Golden Sunflower Company is mainly planted in this way, followed by column brackets. Row planting should be planned to be north-south, so that both sides are evenly exposed.

Cross reinforcing bar brackets. Dr. Wang Qunguang from Taiwan abandoned his doctor’s practical experience in planting dragon fruit for many years and thought that this kind of stent is the most ideal. The method is to use a five-point (1.7 cm) thick steel bar, which is cut into 2 m and 3.2 m.

The former is used to frame the feet, and the two steel bars are obliquely knocked into the soil by 0.5m, and the upper parts cross each other, and the distance between the cross legs is 3 m. Use stainless steel wire or steel cable clamps to tie the intersection (including the transverse reinforcement), and add a steel bar (or pipe) in the middle of the transverse reinforcement to withstand the vertical pressure to withstand the subsequent heavy pressure. The next seedlings and the temporary wooden stakes are the same as the second way. After the long height, the stems are placed on the transverse reinforcement.

Non-scale planting of red heart dragon fruit can also be attached to low walls, live stumps, and even rely on the trunk of the lower part of the betel nut. However, it is not possible to use scaffolding cultivation, because the stems that extend horizontally have many branches and less buds, and it is difficult to harvest even if the fruit is finished. The tops of the sheds are difficult to cut, and the black holes under the shed are unfavorable to the flowering results.

The above is a detailed introduction to the cultivation method of red heart dragon fruit. Red Heart Dragon Fruit tastes sweet and delicious, and it contains a lot of anthocyanins, which has a strong anti-oxidation effect and has a very good health care effect on the human body. The weight of dragon fruit represents its good or bad. The heavier the red heart, the more plump the fruit, the more juice. There is also its scale-like peel, the best to turn outward, usually this kind of red dragon fruit is more delicious.

This article URL: Red Heart Dragon Fruit Planting Method Red Heart Dragon Fruit High Yield Planting Technology

Fiberglass Safety Helmet

Fiberglass safety helmet

Fire Safety Helmet,Work Safety Helmet,Fiberglass Safety Helmet,Construction Safety Helmets

Shandong Binzhou Yong'an Labor Protection Factory , https://www.zhuqiangsafetybelt.com

Posted on