Select bag cultivation, increase cost of savings
The choice of cultivation materials in the mix requires that both the growth of the mushrooms and the waste be avoided. Commonly used formula: wood chips 83%, bran 16%, gypsum 1%, lime 0.2%, moisture content of about 55%. If you produce 1000 bags (the size of the bag is 18 centimeters and 60 centimeters), the ingredients are: 1500 kilograms of dried wood chips, 240 kilograms of bran, 17.5 kilograms of gypsum, and 1200-1300 kilograms of water. Remind farmers to note that the thickness of sawdust is generally about 9 mm in grain length is appropriate, can not have wood, wood and other block-like hard objects.
In addition to cultivating materials, it is the choice of cultivation bags. The cultivation of shiitake mushrooms generally uses double bags. The inner bag is made of a high-density polyethylene plastic bag with a width of 18 cm and a thickness of 0.06-0.08 mm and cut into 60 cm long. Tight, and in the flame sealed the rope into a smooth granular, suitable for airtight; outer bag thickness 0.1-0.2 mm, width 20 cm, length 62 cm. General production of 1,000 bags, need to grow bags about 13 kg.
Thoroughly sterilize germ-free bacteria to create a suitable environment for growth
The sterilization process is very important. It is an important guarantee for the growth of Lentinula edodes in the later period. In production, the sterilization is basically the use of normal pressure steam sterilization, mainly soil steam stoves and imported steam sterilization furnace, the latter can be moved to save fuel. The pots should be loaded immediately after bagging and can not be delayed. When the pot is installed, the bags are laid flat, and the same layer of bags must be tightly packed. The upper and lower bags form a vertical line, which cannot be overlapped by "products". Space should be left between the lines to facilitate the smooth flow of steam and prevent localization. Sterilization is not complete. When sterilizing, such as using soil steamer, to "attack the head, control the tail", in the atmosphere before the fire raging, and strive to make the material temperature within 100 hours to reach 100 °C, to prevent the culture materials become acid and odor. When the material temperature reaches 100°C, maintain the material temperature at 100°C with an appropriate amount of fire and maintain it for more than 24 hours. Do not stop the fire halfway and do not cool down. After reaching the time, a ceasefire is used to cool the temperature. When the material temperature is below 70°C, the pot is panned, moved into a well-conditioned culture room, and placed in a “goods†shape, and the doors and windows are cooled.
Mushroom inoculation to grasp the temperature
The time of inoculation is to look at the temperature of the bag. When the temperature of the bag is lower than 28°C, wipe the bag, strain, and inoculation tool with 75% alcohol or 2% mushroom solution, and wait until dry. Inoculate into the inoculation box, and ignite 5 small mushrooms in Baofeng seal for 30 minutes after inoculation. Play a hole and then a hole, each bag to connect 3 points, access to the bacteria into blocks, fill the hole, seal the mouth, raised. After taking a box, move it into the training room and place it in a “goods†shape or in a piled wood pattern.
To create an environment suitable for the growth of mycelium
Keep the culture room dark, clean, dry and well ventilated. The key is temperature and ventilation. Temperature management of mushroom bag should be based on the temperature range of mushroom mycelium growth: Lentinus edodes mycelium can grow at 5°C-32°C, 24°C-27°C is the most suitable, and over 30°C is poorly grown. If the mycelial growth time of shiitake mushroom is more abundant, the natural temperature will generally follow the inoculation. As long as the temperature of the mushroom bag is above 10°C, no warming is allowed. If the inoculation is late, the bag temperature must be controlled at 24°C-27°C. In the late stage of bacterial bag growth, mycelial respiration will increase the temperature of the bacteria bag, and should be checked frequently, and measures such as enhanced ventilation should be adopted to allow flexible control to prevent the bag temperature from exceeding 30°C and to prevent “burningâ€.
Grow lighting can be one of the most essential factors to successful plant production in a commercial greenhouse because grow lights help to lighten shady spots and propagation areas in the greenhouse. If you are growing tropical plants, you may need to set up grow lights if the plants don't get at least eight hours of sun each day. Most crops benefit from supplemental lighting, when increased growth and quality is converted into added revenue. We provide Growing Light and complete systems for your greenhouses.
Greenhouse Growing Light,Greenhouse Grow Lights,Plant Grow Lights,Greenhouse Plant Lights
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.skyplantgreenhouse.com